2013 & 2014 Isuzu FRR600 AMT

QR:  2013 & 2014 Isuzu FRR600 AMT

Enquire Now

  • This field is for validation purposes and should be left unchanged.
2013 & 2014
68195 & 48388
Keywords: | |

Engine and Drivetrain

Wheels and Tyres

Turntable and Guards

Body Spec

Other Details

This truck is offered at well below market value. It is set up as a mobile workshop with an Elevated Work Platform (EWP). The platform is rated at a 400kg Safe Working Load (SWL). It Is LV insulated to 2.5kV. Platform has fully compliant lift up/fold down fibreglass safety handrails with inter-lock system, LED work lamps around base of platform for illumination, E Stop control on platform and alert buzzer between platform and cab, platform has it own battery bank for these systems and is directly charged from the truck system when stowed! Full step access to platform with non-skid treads, Hi-vis panels and paint where required for safety. Stability outriggers/legs at rear with safety inter-locks between platform. Emergency lowering system fitted in case of emergency and manual jack as well. The platform and outriggers are run via the Isuzu Auxiliary engine. Meaning no PTO/oil pump is required saving on engine idling hours!


Other specifications as follows;

O/A vehicle Dimensions: 7200mm long x 2300mm wide x 3300mm high

Platform Dimensions: 3640mm long x 1520mm wide

Platform Height: 5500mm ground to platform

SWL: 400kg’s

Leakage Test: 2.5kVa

Max Wind Speed: 45km/hr

Auxiliary Engine: Isuzu 3CA1-AZPOI. 3 Cylinder, 55Cu in, 4 stroke, water cooled, Ohv, 7.8kW (10.4 Hp) @ 1800rpm constant. 17.5kW (23.5hp) @3600rpm variable. U.S. EPA Tier 4 Interim emission standard.


Body: Full mobile workshop set up with Robinson aluminium roller shutter doors, fully lockable. Separate narrow full width cabinet across front of body. Step up to a full workbench with vice on LH side, ample storage throughout, LED work lamps inside and out. Non-skid rubber matting on the work/floor surfaces, Fire extinguishers, wheel chocks all supplied. Folding warning sign panels at rear, cable coil drum carrying capacity at rear and rear LH side.

Certification: The truck/trucks will be supplied with a newly completed five (5) year rebuild carried out to the EWP unit, all relevant certification will be issued to the successful purchaser.